PORON® AquaPro® Family: Formulation 37 ? Supported - SOGIMI

The information contained in this Data Sheet is intended to assist you in designing with Rogers' Elastomeric Material Solutions.







SUPER STICK - Powerhouse Building Solutions
ASTM E154, 47 Lbs. Water Resistance: ASTM D1056 Vacuum - .5% max. Moisture Vapor Transmission: ASTM E 96-53 (Method E) - .012 perms. PROTECTO WRAP COMPANY. (800) ...
Mathieu Baril - Laboratoire de robotique - Université Laval
Foam, but not adhesive, meets ASTM D1056. Material has a waffle finish and does not have a skin. Adhesive is acrylic and has a temperature range of ?20° to ...
Standard Specifications - City of San Diego
d) ASTM D1056: Standard Specification for Flexible Cellular Materials - Sponge or Expanded. Rubber e) ASTM D 3350: Standard Specification for Polyethylene ...
PROTECTO SUPER STICK Building Tape® - Best Materials
ASTM D2582, 2,500 grams. Water Resistance: ASTM D1056 Vacuum - .5% max. Moisture Vapor Transmission: ASTM E 96-53 (Method E) - .15 perms/10mil. PROTECTO WRAP ...
FINAL REPORT
conforming to ASTM D 1056, of 10 mm thickness and of density not less than 30 kg/m³. Joint filler shall have, but not be limited to, the following minimum ...
Section 700 MATERIALS and MANUFACTURING - NYSDOT
Joint gasket material shall meet the requirements of ASTM D1056,. Grade # 2A1 ... shall conform to the latest specification for ASTM A446, Grades A through E.
Protecto Super Stick | DSP Activité
ASTM E154, 47 lb. Résistance à l'eau: ASTM D1056 Vacuum - .5% max. Transmission de vapeur d'eau: ASTM E 96-53 (Méthode E)-.012 perms. DSP Activité Inc. 1605 ...
REI Advanced Materials catalogo 04-22
Shrinkage with heat (TD)(2). ASTM D-1204. %. 0.4. Melung point. DTA. °C. 255 ... ASTM D-1056. %. 25.00. Water absorption. ASTM D-1056. %. 2,<5. Flammability. UL94.
Protecto Super Stick Building Tape? - DHC Supplies
Tensile @ Break TD. ASTM D882. 34,000 psi. Tensile Strength MD. ASTM D882. 44 ... ASTM D1056. Vacuum - .5% max. Moisture Vapor Transmission. ASTM E96. Method E.
Introduction to ASME Code AG-1 - Nuclear Regulatory Commission
This section applies to extended media, dry-type filters with an average atmospheric dust spot efficiency, per ASHRAE 52.1, greater than 40% but less than ...
Vol 4 - STANDARD SPECIFICATIONS - NY.gov
Masonry and mortar cement, used to make masonry mortar. MATERIALS. Masonry Cement ASTM C91. Mortar Cement ASTM C1329 ... D1056, 50 ...
Protecto Super Stick Building Tape? - Protecto Wrap
Tensile @ Break TD. ASTM D882. 34,000 psi. Tensile Strength MD. ASTM D882. 44 lb/in width. Tensile Strength TD ... ASTM D1056. Vacuum - .5% max. Moisture Vapor ...