Anchor bolt ThruFast - ThruMaxx - Mettex
td = Recommended drilling depth. ? kN = Load in kN. ? The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete ...
Code of Practice for the Structural Use of Steel 2011 (2023 Edition)The Code of Practice for the Structural Use of Steel 2011 (the 2011 Code) was issued in October. 2011 after a three-year review of the 2005 Code ... PHD / DTB Holdowns - MiTekThe third form (Anchor/FM-03) is used as a checklist by the contractor supervising the installation of the anchor on site. European Technical Approval (ETA). TD / TDX HoldownsAnchor bolts shall be Grade 4.6 and hot dip galvanized in accordance with TS 00033 and fabricated in a rag bolt assembly. Hooks or cogs shall ...
Autres Cours:
